Hi all,
I just started to use an AD3 and here started with the getting started guide.
Unfortunately I only see the attached scope printout.
Do I do something wrong? (1+ is connected to W1, 1- is connected to ground, all other connectors unconnected/open)
Thanks in advance for your help and best regards,
Eckhard
Edited by Eddi It turned out, that this malfunction is related to connecting the AD3 via an USB 3.0 Hub. After connecting directly to the PC, it works good.
Question
Eddi
Hi all,
I just started to use an AD3 and here started with the getting started guide.
Unfortunately I only see the attached scope printout.
Do I do something wrong? (1+ is connected to W1, 1- is connected to ground, all other connectors unconnected/open)
Thanks in advance for your help and best regards,
Eckhard
It turned out, that this malfunction is related to connecting the AD3 via an USB 3.0 Hub. After connecting directly to the PC, it works good.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now