I wrote a protocol decoder for the SAE J1850 VPW bus that can be used in WaveForms' Logic Analyzer. I share it.
The decoder works on the DIO 0 channel. It decodes frames and can display bytes (if the DiplayBytes variable is set to true).
I also attach a csv file containing a test sample recorded from a working bus. (This pattern should be imported into the Samples tool for the DIO 0 channel at 346021 Hz.)
Note that the J1850 VPW bus uses a level higher than 5V. Do not connect the input of the logic analyzer directly to the bus.
Question
TOIVI
I wrote a protocol decoder for the SAE J1850 VPW bus that can be used in WaveForms' Logic Analyzer. I share it.
The decoder works on the DIO 0 channel. It decodes frames and can display bytes (if the DiplayBytes variable is set to true).
I also attach a csv file containing a test sample recorded from a working bus. (This pattern should be imported into the Samples tool for the DIO 0 channel at 346021 Hz.)
Note that the J1850 VPW bus uses a level higher than 5V. Do not connect the input of the logic analyzer directly to the bus.
J1850_VPW.txt J1850_VPW_DIO_0.csv J1850_VPW_V2T.txt
Link to comment
Share on other sites
6 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now