I am considerering the Analog Discovery for the following application but from the datasheet I am unsure if it can perform this type of acquisition:
I need one DAC-channel to generate a TTL trigger at 20 kHz
Synchronous to this trigger one ADC channel should acquire the signal at full sampling rate and average at 20 kHz the raw signal (coherent averaging). The averaged signal should then be sent to waveforms/display for the user for further processing.
Is this possible with one of the Analog Discovery models? We own several Analog Discovery 2 but it I could only get "software averaging" to work, which is way to slow for our application. Also it is not an option to have a high speed transfer to a beefy PC to do the memory averaging on that hardware. It should be an embeddable solution.
Question
Oliver Kliebisch
Hi,
I am considerering the Analog Discovery for the following application but from the datasheet I am unsure if it can perform this type of acquisition:
Is this possible with one of the Analog Discovery models? We own several Analog Discovery 2 but it I could only get "software averaging" to work, which is way to slow for our application. Also it is not an option to have a high speed transfer to a beefy PC to do the memory averaging on that hardware. It should be an embeddable solution.
Thanks!
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now