Looking for a USB DAQ voltage device can carry 30V

[shuaiwangwpi]

Hi My USB 2408 can't carry an input voltage over 10V, but my input is 30V and can't go lower because of the standard. Could you please recommend a device that can carry 30V?

THANK YOU!!!!

[Fausto]

@shuaiwangwpi,

One option is the DT9874-00T-00R-08V MEASURpoint USB instrument.

https://www.mccdaq.com/Products/MEASURpoint-Temperature-Instruments/MEASURpoint

Alternatively, can you use a voltage divider to decrease the voltage level within the USB-2408 maximum voltage input range?

Regards,

Fausto

[shuaiwangwpi]

19 hours ago, Fausto said:

@shuaiwangwpi,

One option is the DT9874-00T-00R-08V MEASURpoint USB instrument.

https://www.mccdaq.com/Products/MEASURpoint-Temperature-Instruments/MEASURpoint

Alternatively, can you use a voltage divider to decrease the voltage level within the USB-2408 maximum voltage input range?

Regards,

Fausto

i really appreciate your help!!!

[Fausto]

Hello @shuaiwangwpi.

An alternate option to consider, if using the USB-2408 with your application, is a third party signal conditioning module.  DATAFORTH offers a few signal conditioning module options for your voltage requirement.  Take a look at their SCM5B41 Series.  This series supports input voltage range of +/-40 V and a variety of output voltage levels, which would be connected to the USB-2408 screw terminals.  (Note: The third party signal conditioning modules do not connect directly to the USB-2408 screw terminals, so the user would be responsible for additional hardware accessories and configurations.)

https://www.dataforth.com/scm5b40_41

Regards,

Fausto