How to boot Petalinux in Nexys Video board(XC7A200T-1SBG484C)

[Arjun_12]

hello to everyone,
I'm attempting to build petalinux for the Nexys video board (XC7A200T-1SBG484C). I was able to extract the XSA file from the digilent official website's design of video DMA audio demo. I'm running petalinux 2022.2. I was able to build petalinux successfully, but I was unable to boot it on the board.  I've included the UART terminal window. I am getting an initcall sequence error. What is the best way to build petalinux on a Nexys video board? What can we do to solve this problem?I have attached the block design of the video DMA audio demo project.

Commands followed to build Petalinux

Step1: Creating the project
petalinux-create --type project --template microblaze --name DMA_test1

Step 2: Configuration and attachment of XSA file
petalinux-config --get-hw-description /home/arjun/RCI_project/hw/DMA_v2_sim.xsa

Step3: peta build
petalinux-build

Step4: Programming the FPGA
petalinux-boot --jtag --fpga

Step5 : Booting Petalinux
petalinux-boot --jtag --kernel

UART terminal window(GTK)

U-Boot 2022.01 (Sep 20 2022 - 06:35:33 +0000)
Model: Xilinx MicroBlaze
DRAM:  512 MiB
Loading Environment from nowhere... OK
In:    serial
Out:   serial
Err:   serial
Model: Xilinx MicroBlaze
initcall sequence 9ffec9c8 failed at call 80100b2c (err=-1)
### ERROR ### Please RESET the board ###

Block Design: