Code for Labview

[Pooja Bista]

Dear Application Engineers,

 

 

I  am  reaching out to request the necessary code to run in LabVIEW with DT9837A series using LV-Link 3.0. I need the code to run seismic sensors in LabVIEW for data Acquisition for sound and vibration measurement. It would be helpful if you could provide me with the appropriate code  or point towards the right application I need to get to obtain it.

 

Thank you for your time and assistance!

[JRys]

Hello,

The first thing you will want to do is to install the required software from the Omni CD. Once this has been completed, install LV-LINK3. Use the following downloads:

https://mcc.download.ni.com/#downloads/DTSoftware/Omni-CD/

https://mcc.download.ni.com/#downloads/DTSoftware/LVLink/

The Omni-CD installs the QuickDAQ software, which can be used to test the device. 

The LabVIEW support, including examples, is placed into \National Instruments\LabVIEW 2023\user.lib\LV-Link3\

Start with the DTAinContinuous.vi example. Then, to control the input coupling and the source current, add DtOLSetChanIepeOptions.vi after the DtCreateAinChan.vi. 

Best regards,
John