Digilent 310-014 Cable Question

[AlexR]

Hello,

I have a question about a product of yours. It is the 310-014 cable. One end has a black 6 position housing and the other end has 6 individual pins. I need to configure both ends using the 6 position housing connector on both ends. Could you please give me the part number so I can convert the individual pin side of the cable so it is like the other end. I have already purchased several of these units and need more but I need to convert the cable so both ends are the same.

Thanks,

Alex

Allmetal, Inc.

[Fausto]

Hello @AlexR.

The 6-pin MTE cable has a 6-pin standard 100mil spaced 25mil square connector.

https://digilent.com/shop/6-pin-mte-cable/

Use manufacturer part # 65039-031ELF

Regards,

Fausto

[AlexR]

Hello Fausto,

Thanks for your feedback on my question.  Unfortunately I bought the exact same part(s) as you listed above 65039-031ELF (and even another one 65039-031LF) and both of them were too tight for the pin to go into.  They looked and measured exactly the same.  I can't understand why they did not work.  If you can please see if Digilent is using another connector brand besides Amphenol FCI which is the part number for the one you provided me.  Maybe Diligent is using another brand like Molex or someone else.

Thanks,

Alex