MCC172 stack and POE hat?

[NicR]

Hi,

I've got a stack of 7 MCC172s & they all running fine. Will it be OK to stack them on top of a Power Over Ethernet hat?

 

[Fausto]

Hello @NicR.

A POE HAT was not test by MCC with the MCC DAQ HATs.  If you have a baseline of data without the POE HAT, then you can compare the data after testing with the POE HAT.  Let us know how it goes.  You may need to add a shield between the POE HAT and the MCC 172 to reduce any noise.

Regards,

Fausto

[NicR]

They physically dont fit so that's that option out of the window

[Fausto]

There are other POE HATs online.  For example... 

https://www.waveshare.com/wiki/PoE_HAT_(B)

https://www.waveshare.com/wiki/PoE_HAT_(E)

Verify that none of the pins used conflict with the MCC DAQ HATs.

Good luck.