The new board that I received seems to have a thermal problem. It appears to boot properly from an SD card (image 3.0) but not from the quad-spi. It seems that there is a narrow temperature window where it rarely will boot from the quad-spi however this could just be a random occurrence.
details:
When booting from quad-spi, the multi color leds continue to toggle rgb and the 4 green leds are illuminated (never flash).
when booting from SD at the final stage the 4 green leds flash 4 times and all is good.
Any help getting the RMA moving would be greatly appreciated. I need this board for a Lab requirement.
Dave
Added note: When booting from quad spi the console port shows the following
Initializing...
init:done
PYNQ Rev. B Board Manufacturing Test Image 3
Question
DavidJones
The new board that I received seems to have a thermal problem. It appears to boot properly from an SD card (image 3.0) but not from the quad-spi. It seems that there is a narrow temperature window where it rarely will boot from the quad-spi however this could just be a random occurrence.
details:
When booting from quad-spi, the multi color leds continue to toggle rgb and the 4 green leds are illuminated (never flash).
when booting from SD at the final stage the 4 green leds flash 4 times and all is good.
Any help getting the RMA moving would be greatly appreciated. I need this board for a Lab requirement.
Dave
Added note: When booting from quad spi the console port shows the following
Initializing...
init:done
PYNQ Rev. B Board Manufacturing Test Image 3
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now