DaqOutScan not a function for USB-2637 board

[SDI_Chuck]

in my project I use DaqOutScan() with the 2500 boards.  We are trying to migrate to the 2600 boards but this function is not used by the 2600 boards.  Is there a compatible function for DaqOutScan() for the 2600 boards?  Examples?

[Fausto]

Hello @SDI_Chuck.

As you have discovered, the DaqOutScan() function is not supported by the USB-2600 Series boards.  There is no alternate option to clock the analog output channels and digital output ports, on a USB-2600 Series board. 

MCC UL Help file:  https://www.mccdaq.com/pdfs/manuals/Mcculw_WebHelp/ULStart.htm

 

Regards,

Fausto

[SDI_Chuck]

Well, this puts us in a critical production situation since the 2500 boards are difficult to purchase as well as being phased out.  The 2600 series has been suggested as a replacement but if it doesn't support synchronous IO it doesn't seem to be a very good replacement.  Is there a workaround software solution for this? Is there an example? 

[Fausto]

Hello @SDI_Chuck.

There is no software workaround.  Here is a list of boards that support the DaqOutScan() function.

Regards,

Fausto

[SDI_Chuck]

This is unfortunate.  Please inform the sales people that the 2600 series boards are not a suitable replacement for the 2500 series if synchronous I/O is a requirement.