nexys 4

[Sayali Choudhari]

Can anyone please tell me which software should I use to program a fpga to run stepper motor. 

[artvvb]

Hi @Sayali Choudhari

Welcome to the Forums!

Digilent doesn't directly provide any stepper motor example projects. You can find all of the documentation on using the Nexys 4 board here:

https://digilent.com/reference/programmable-logic/nexys-4/start

And the Nexys A7 (an updated version of the product) is documented here:

https://digilent.com/reference/programmable-logic/nexys-a7/start

You will likely need to develop your own project in Vivado. Instructions for installing and using it can be found in the resource centers linked above.

This instructable working through using a Basys 3 to do the same looks like a good starting point as well, as the Basys 3 and Nexys are fairly similar boards for this application: https://www.instructables.com/How-to-Control-a-Stepper-Motor-With-an-FPGA/

Thanks,

Arthur

 

Edited September 27, 2022 by artvvb
project -> product