Jump to content
  • 0

Analog Discovery 2 Accessory Cable Pinout: PN 310-100


InductorConductor

Question

The accessory PN: 310-100 - is an MTE cable - from the pictures included in documentation it appears that pin 1 on one side of the cable does not connect to pin 1 on the other side of the cable.  This cable was clearly made as an accessory to the Analog Discovery 2. 

Can someone share the cable drawing, or at least the pinout of this accessory cable?  I'd like to design to plug into my own PCB from the Analog Discovery 2.  Interested in this version so I only have to land 1 connector into my PCB rather than 30 flying leads.  

Link to comment
Share on other sites

2 answers to this question

Recommended Posts

  • 0

Hello,

The cable layout on the Analog Discovery 2 (AD2) Resource Center page shows how the individual wires are arranged with the cable inserted into the AD2. If you open the plastic case and look at the header connector solder pads, you will see that one of them is square, this is pin 1 (digital bit 7). The pins on that side of the connector are odd number and the other side are even. For example, digital bit 6 is pin 3, digital bit 5 is pin 5 and so on.

image.png.057041bf678d72205802d60f4e72e684.png

regards,

John

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...