samokami Posted January 16, 2022 Share Posted January 16, 2022 Hello everyone, i am trying to make an HDMI passthrough but i get only a blackscreen. Any idea why? the camera used is Sony action cam HDR- as200v res 720p, 24p, tcout mp4, and connected to ZYBO HDMI RX. Output from ZYBO HDMI TX to TV. all settings are in attachment constant0 st set on 0 value. constant1 is set on 1 value. thank you in advance. coldfiremc 1 Link to comment Share on other sites More sharing options...
1 samokami Posted January 18, 2022 Author Share Posted January 18, 2022 thank you for your answer, yes the TV shows no input signal, it's like the camera is not connected to the TV. when i connect the camera directly to the TV it works fine so the camera is functining. I changed the dvi2rgb and rgb2dvi to 720p, the camera is also 720p but nothing changed also connecting pLocked to aRst_n of the next IP doesn't work. dvi2rgb.xdc also no success. I will try to debug and let you know. @coldfiremc the block is not optimized or deleted. thanks coldfiremc 1 Link to comment Share on other sites More sharing options...
0 elodg Posted January 17, 2022 Share Posted January 17, 2022 Black screen as in not locked to an input or locked, but the pixels are black? There are several reason why such a passthrough design wouldn't work. Since there is no frame-buffer, the source and the sink have to support a common resolution and the source would have to output at that. Does the cam work when connected directly to the TV? If yes, the resolution is 720p, choose that for both preferred resolution and clock ranges in the IP wizards. Connect pLocked to aRst_n of the next IP and to ILA or a LED to confirm the input side is working. Enable debug module in dvi2rgb and do a capture in Vivado Hardware Manager on the logic analyzer. Constrain the TMDS input clock in the top-level constraints file (check dvi2rgb.xdc). Link to comment Share on other sites More sharing options...
0 coldfiremc Posted January 17, 2022 Share Posted January 17, 2022 On 1/16/2022 at 9:44 AM, samokami said: Hello everyone, i am trying to make an HDMI passthrough but i get only a blackscreen. Any idea why? the camera used is Sony action cam HDR- as200v res 720p, 24p, tcout mp4, and connected to ZYBO HDMI RX. Output from ZYBO HDMI TX to TV. all settings are in attachment constant0 st set on 0 value. constant1 is set on 1 value. thank you in advance. Check logs and implemented design to see if the block is optimized/deleted in some way Link to comment Share on other sites More sharing options...
Question
samokami
Hello everyone,
i am trying to make an HDMI passthrough but i get only a blackscreen. Any idea why?
the camera used is Sony action cam HDR- as200v res 720p, 24p, tcout mp4, and connected to ZYBO HDMI RX. Output from ZYBO HDMI TX to TV.
all settings are in attachment
constant0 st set on 0 value.
constant1 is set on 1 value.
thank you in advance.
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now