sandeepsan Posted June 9, 2016 Share Posted June 9, 2016 Hi, I am Newbie to Zybo. I am able to successfully boot Linux digilent kernel on Zybo using SD card. ( Kernel used: git clone –b master-next https://github.com/DigilentInc/Linux-Digilent-Dev.git”) Please let me know which rootfs has to be used along with the digilent kernel so that that kernel is in sync with the root fs. Thanks Link to comment Share on other sites More sharing options...
NAEastland Posted June 9, 2016 Share Posted June 9, 2016 Hey Sandeepsan, Glad to hear you are getting into E-Linux on the Zybo! There are a number of file systems available on the repository that are designed to work for Linux, however the one I can recommend for use on the Zybo is the ext4. There may be others that are capable of allowing you to run Linux on the Zybo, however that is the file system I am most familiar with. Good luck on your foray into embedded Linux. Regards, Nate Link to comment Share on other sites More sharing options...
sandeepsan Posted June 10, 2016 Author Share Posted June 10, 2016 Hi Nate, Thanks for the information. I partitioned the SD card with ext4 file system. Regards Sandeep Link to comment Share on other sites More sharing options...
Question
sandeepsan
Hi,
I am Newbie to Zybo. I am able to successfully boot Linux digilent kernel on Zybo using SD card. ( Kernel used: git clone –b master-next https://github.com/DigilentInc/Linux-Digilent-Dev.git”)
Please let me know which rootfs has to be used along with the digilent kernel so that that kernel is in sync with the root fs.
Thanks
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.