S.P Posted February 21, 2021 Share Posted February 21, 2021 Hello evreyone, i want to ask which cable should be used for "Cmod C2: Breadboardable CoolRunner-II CPLD Module" . I am novice with Digilent, so I dont know what mean JTAG3 cable?(the only explanation in reference manual with this Module). Is that JTAG-HS3, JTAG-HS2, JTAG-USB Cable or some ohter(section programmers on the DIgilent Web site)? Regards Link to comment Share on other sites More sharing options...
JColvin Posted February 23, 2021 Share Posted February 23, 2021 Hi @S.P, Any of those cables you mentioned should work; if you're not certain, each of those programmers reference manuals (JTAG HS3 reference manual link as an example) has a list of supported target devices, on which the Coolrunner-II CPLDs are listed. Thanks, JColvin Link to comment Share on other sites More sharing options...
S.P Posted February 28, 2021 Author Share Posted February 28, 2021 Hi JColvn, many thanks for your answer, could you please tell me about basic learning material "Cmod C2: Breadboardable CoolRunner-II CPLD Module", how should I start? I am a novice in this field. Regards Link to comment Share on other sites More sharing options...
JColvin Posted March 2, 2021 Share Posted March 2, 2021 Hi @S.P, Our Coolrunner-II CPLD is retired, so we don't have a lot in terms of active support. All of the materials that we do have for the Coolrunner-II can be found on it's Resource Center here: https://reference.digilentinc.com/reference/programmable-logic/coolrunner-ii/start. It looks like Xilinx may have some additional information (though perhaps not for this board specifically) on their website as well: https://www.xilinx.com/products/silicon-devices/cpld/coolrunner-ii.html. Thanks, JColvin Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.