I have a Zybo Zynq 7000 board I am using for a class and the board stopped working recently. I keep getting errors that suggest the board is disconnecting from the Vivado SDK but the computer still recognizes a device connected to the computer. Upon further inspection, I noticed that the silkscreen is scratched on the top of the board. This can be seen in the attached picture. Is there a trace under the "PROG UART" silkscreen text that got cut? Thank you for any help you may be able to provide.
Question
totalJTM
I have a Zybo Zynq 7000 board I am using for a class and the board stopped working recently. I keep getting errors that suggest the board is disconnecting from the Vivado SDK but the computer still recognizes a device connected to the computer. Upon further inspection, I noticed that the silkscreen is scratched on the top of the board. This can be seen in the attached picture. Is there a trace under the "PROG UART" silkscreen text that got cut? Thank you for any help you may be able to provide.
Link to comment
Share on other sites
0 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.