crash_override Posted August 5, 2020 Share Posted August 5, 2020 I'm inputting a sine wave at 100 kHz into an amplifier using WaveForms like this. When I got to read it with the scope in WaveForms, it looks like this. On all my other scopes it sees a sine wave. I'm thinking it must be some simple setting I'm missing. Link to comment Share on other sites More sharing options...
attila Posted August 5, 2020 Share Posted August 5, 2020 Hi @crash_override Note that you have set the Scope Channel 1 Range to 500 uV/div, set this to 500 mV Link to comment Share on other sites More sharing options...
Question
crash_override
I'm inputting a sine wave at 100 kHz into an amplifier using WaveForms like this.
When I got to read it with the scope in WaveForms, it looks like this.
On all my other scopes it sees a sine wave. I'm thinking it must be some simple setting I'm missing.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.