Basys 3 clock question

[whbweb]

I have looked at everything I can find in the way of info on the Basys 3 board, but I don't see what generates the 100 MHz clock. All I found is that it was connected to pin W5. I had assumed there would be a crystal involved, but I don't see the kind of package I'm used to seeing on microcontroller boards. Ideally, I'd like to have a part number so I can look at a data sheet.

[hamster]

IC9 is the 100MHz oscillator. It is on the bottom, just to the right of center. 

See the bottom left of page 5 of the schematics (on the resources page). 

Part code is DSC1033CC1-100.0000T

[whbweb]

21 minutes ago, hamster said:

IC9 is the 100MHz oscillator. It is on the bottom, just to the right of center. 

See the bottom left of page 5 of the schematics (on the resources page). 

Part code is DSC1033CC1-100.0000T

Thanks so much - that's very helpful!