timseverance77 Posted April 2, 2020 Share Posted April 2, 2020 Hi, For the Genesys ZU: Zynq Ultrascale+ MPSoC Development Board, what do I use for an external oscillator connection to drive Clocking Wizards in a project? Looking through the schematic I see a VCU oscillator, but it seems it isn't placed. Thanks. Tim Link to comment Share on other sites More sharing options...
Ana-Maria Balas Posted April 6, 2020 Share Posted April 6, 2020 Hello @timseverance77, PS_REF_CLK is connected to PS and has 30 Mhz. SYSCLK goes from DP83867 and has 25 Mhz. Link to comment Share on other sites More sharing options...
elodg Posted April 20, 2020 Share Posted April 20, 2020 More info on the clocks has now been added to the RM: https://reference.digilentinc.com/reference/programmable-logic/genesys-zu/reference-manual#oscillatorsclocks Link to comment Share on other sites More sharing options...
Question
timseverance77
Hi, For the Genesys ZU: Zynq Ultrascale+ MPSoC Development Board, what do I use for an external oscillator connection to drive Clocking Wizards in a project? Looking through the schematic I see a VCU oscillator, but it seems it isn't placed.
Thanks.
Tim
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.