Thomburger Posted December 2, 2019 Share Posted December 2, 2019 Hello, if I want to open the device with DigilentAgent, I can't connect (“Unable to communicate with the device”). Although I see the openscope in the windows (Win7) device manager. I have installed the latest version of digilentAgent (1.2.3). Do you have any idea what the problem might be? Link to comment Share on other sites More sharing options...
vicentiu Posted December 2, 2019 Share Posted December 2, 2019 Can you try exiting and restarting the Digilent Agent? I noticed that if you don't choose the correct COM port the first time, it needs to be restarted for it to work. Link to comment Share on other sites More sharing options...
Thomburger Posted December 2, 2019 Author Share Posted December 2, 2019 Hi, I tried it, but the restart doesn't change anything. Link to comment Share on other sites More sharing options...
vicentiu Posted December 2, 2019 Share Posted December 2, 2019 Is the blue LD4 led flashing? Link to comment Share on other sites More sharing options...
vicentiu Posted December 2, 2019 Share Posted December 2, 2019 Please also try the firmware recovery procedure Link to comment Share on other sites More sharing options...
vicentiu Posted December 2, 2019 Share Posted December 2, 2019 What browser are you using? Have you tried a different one? Link to comment Share on other sites More sharing options...
Thomburger Posted December 2, 2019 Author Share Posted December 2, 2019 Hi, LD 4 is not flashing. Normally, I use Chrome, but I tested also Firefox. The firmware recovery procedure worked. Thank you! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.