Analog Discovery 2 vs Raspberry Pi 3

Hi. I've replaced my Cubieboard with a Raspberry Pi 3, and it runs the ARM version of Waveforms really well. With an Electronics Explorer everything works sweet. With the AD2, it complains about supply and/or AUX voltage, even with a 5V 3A power pack attached (The power supply panel indicates that the AUX supply is present so I know it is working well). The USB voltage usually shows as 4.92V at a few 10s of mAs I've tried with 2.5A USB PSU => Pi3 => Powered Hub => AD2, as well

Hello, The USB packets are randomly lost or altered with Analog Discovery (1 & 2) on Raspberry Pi (1 & 2). With RPi1 this happens too often. With RPi2 it manages to configure the device, but later it receives wrong status information. Due to this, the application sees randomly having unpowered, 0V, 0A device... Similarly it could receive wrong acquisition data too. I suppose some low level USB library/firmware timeout issue is causing this problem. I have not yet tried RPi3 b