Analog Discovery 2 vs Raspberry Pi 3
Hi. I've replaced my Cubieboard with a Raspberry Pi 3, and it runs the ARM version of Waveforms really well. With an Electronics Explorer everything works sweet.
With the AD2, it complains about supply and/or AUX voltage, even with a 5V 3A power pack attached (The power supply panel indicates that the AUX supply is present so I know it is working well). The USB voltage usually shows as 4.92V at a few 10s of mAs
I've tried with 2.5A USB PSU => Pi3 => Powered Hub => AD2, as well
Hi @Grimmers
The Raspberry Pi 4 Model B is working well with the Analog Discovery 2 when connected to the USB 3 (blue) ports. It was running continuously for more than 24 hours. The connection to the device over the USB 2 (black) ports dropped after 6-12 hours.
It looks like the problem was caused by the external USB hub. After connecting the AD2 directly to RPi4B USB 2.0 port it is working since 2 days.