Hi. I've replaced my Cubieboard with a Raspberry Pi 3, and it runs the ARM version of Waveforms really well. With an Electronics Explorer everything works sweet.
With the AD2, it complains about supply and/or AUX voltage, even with a 5V 3A power pack attached (The power supply panel indicates that the AUX supply is present so I know it is working well). The USB voltage usually shows as 4.92V at a few 10s of mAs
I've tried with 2.5A USB PSU => Pi3 => Powered Hub => AD2, as well
FTDI USBs like AD, AD2, DD are not working with RPI model B (1,2,3) data packets/bytes are randomly lost.
The EExplorer with different USB controller is working fine on these.
All devices are working with other embeddeds: Zed, Zybo, BeagleBone…
According reports AD is working with the original RPI model A and probably Zero because it has similar chipset/USB.
The problem seems to be with FTDI or RPI B USB, library or hardware. You can find such comments regarding RPI problems with oth