Dear Attila,
Thanks for your response. I could generate a sine sweep, but still I have a problem.
When I generate a sine sweep at low frequencies, for example from 2Hz to 10Hz, and plot the periods of the signal, I can see that the period is changing continuously as showed in the figure below.
But when I do the same for higher frequencies like 50Hz to 500Hz, the frequency is not changing continuously anymore as showd in the figure below.
I even tried with the WaveForms software to see if the problem is with my code or not, but the result was the same. Is there any limitation in generating sine sweep signals with Analog Discovery 2?
I would like to thank you in advance for your kind support.
Thanks,
Saeed