[Zedboard slide switch (power on/off) part number?]

Hi JColvin,

 

I was able use this part ordered on Amazon.

20 Pcs 5mm High Knob Vertical Slide Switch 3 Pin 2 Position 1P2T SPDT Panel (Pack of 20) CYT1107 (see picture)

Thanks and Regards

Steve

 

[Zedboard is not detected in windows 10 64-bit]

Hello JColvin,

I also have issues with connecting the USB to UART with Zedboard rev. D

I installed the CypressDriverInstaller_1

I'm running Windows 10 PRO and Device Manager does not detect Cypress USB to Serial Adapter  or Cypress Serial (Com) (see picture)

Rebooting Windows and re-installing as Admin does not change the outcome.

My Jumpers 5 MIO jumpers arranged as follows (see picture)

MIO2 (JP7) - GND
MIO3 (JP8) - GND
MIO4 (JP9) - 3.3V
MIO5 (JP10) - 3.3V
MIO6 (JP11) - GND

VADJ set to 1.8 V, not sure about JP6 and JP2 near the microUSB ports both loaded), and a cable connected to J14 (UART).

I see power LED (LD13) and then subsequently power LED (LD12) both turn on as well as the OLED display. (see picture)

If I connect the HDMI cable I see two penguins on the screen.

I verified that the SD card contains the

sd_image:
   -- BOOT.BIN – Zynq configuration file that was generated using the 3 files
                 found in the boot_image folder.
   -- devicetree_ramdisk.dtb – Prebuilt device tree
   -- ramdisk8M.image.gz – Prebuilt Linux filesystem
   -- README – readme document that describes how to run the OOB design
   -- zImage – Prebuilt Linux kernel

Any help would be appreciated.

Thanks and Regards

Steve

 

 

 

[Zedboard slide switch (power on/off) part number?]

The Zedboard slide switch (power on/off) broke.

Can anyone provide a part number to replace?

Thanks and appriciated.