jaejoo14

Yes, I can hear the clicking sounds for Channel #1 and #2. Still issue. Do you think I need to contact the support for a warranty?

after reset and factory load. did AWG1 calibrated. While calibration of Scope Channel #1., Channel Reference Average Minimum Maximum CH1 0 V 0.25203 V 0.18282 V 0.32756 V Range: 62.404 V Offset: 0 V CH2 0 V 0.18155 V 0.11427 V 0.25138 V Range: 62.404 V Offset: 0 V Channel Reference Average Minimum Maximum CH1 0 V -0.60933 V -0.68159 V -0.53305 V Range: 62.404 V Offset: 19.997 V CH2 0 V -0.69062 V -0.76158 V -0.60542 V Range: 62.404 V Offset: 19.997 V Channel Reference Average Minimum Maximum CH1 0 V 1.1324 V 1.0549 V 1.211 V Range: 62.404 V Offset: -19.99663 V CH2 0 V 1.0743 V 1.0053 V 1.1539 V Range: 62.404 V Offset: -19.99663 V Channel Reference Average Minimum Maximum CH1 0 V 0.02201 V 3.3237 mV 0.04221 V Range: 5.4455 V Offset: 0 V CH2 0 V 0.01592 V 6.9797 mV 0.02526 V Range: 5.4455 V Offset: 0 V Channel Reference Average Minimum Maximum CH1 0 V -0.06411 V -0.0845 V -0.04329 V Range: 5.4455 V Offset: 1.9998 V CH2 0 V -0.07145 V -0.08085 V -0.06124 V Range: 5.4455 V Offset: 1.9998 V Channel Reference Average Minimum Maximum CH1 0 V 0.11067 V 0.08949 V 0.13669 V Range: 5.4455 V Offset: -1.99977 V CH2 0 V 0.10533 V 0.09481 V 0.11641 V Range: 5.4455 V Offset: -1.99977 V Channel Reference Average Minimum Maximum CH1 5 V 0.75628 V 0.66655 V 0.83414 V Range: 62.404 V Offset: 0 V CH2 5 V 5.9706 V 5.9037 V 6.037 V Range: 62.404 V Offset: 0 V Channel Reference Average Minimum Maximum CH1 -5 V -0.30918 V -0.3885 V -0.22472 V Range: 62.404 V Offset: 0 V CH2 -5 V -5.60836 V -5.6828 V -5.53425 V Range: 62.404 V Offset: 0 V Channel Reference Average Minimum Maximum CH1 2 V 0.23338 V 0.22534 V 0.2413 V Range: 5.4455 V Offset: 0 V

Scope Channel #1 is not working in Analog Discovery3. The same configuration as Channel #2, it has a very weak signal. Calibrated the AWG #1 and running the calibration of scope brings the exception because of weak signal. Any way to resolve it?

I am very new in this area and like to test the frequency testing in Tube Amp. I am seeing many youtube videos using Audio Analyzer Suites but didn't find anything with WaveForms. Questions I have - Is there any way to test "Total harmonic distortion plus noise" in WaveForms? - Or Is Audio Analyzer Suite running with Analog Discovery 3 on Windows 11 or Mac?