Jump to content

Phil06

Members
  • Posts

    1
  • Joined

  • Last visited

Reputation Activity

  1. Like
    Phil06 reacted to asmi in JTAG-HS3 connect with 6-pin board   
    Yes you can, if you can fit 2.54 mm (typically) jumper leads into 2 mm pitch connector. You may have to cut down JTAG frequency due to signal integrity issues. And watch out for pinout - not all 6 pin JTAG connectors are the same!
    As for exchange, you'd better talk to sales people directly via email, as I understand there are only tech support folks on this forum.
  2. Like
    Phil06 reacted to JColvin in JTAG-HS3 connect with 6-pin board   
    Hi @Phil06,
    You can certainly use jumper cables / wires to have the JTAG HS3 connect to a 6-pin JTAG interface instead, but it will be a bit finicky as asmi indicated.
    Otherwise, it may be worth it to ask the Sales team if you can return/exchange the JTAG HS3 for a JTAG HS2 via the Sales and Order Support form available here: https://digilent.com/shop/shipping-returns/#return-policy (I have no access to any sales or shipping systems).
    The main technical difference between the JTAG HS3 and the HS2 is that the HS2 does not have a PS_SRST pin to be able to reset the processor on Zynq devices during debugging operation, so as long as that is not an issue, there should be no problem to switch over to a JTAG HS2.
    Thanks,
    JColvin
×
×
  • Create New...