lscalambrin

The specs are for worst case scenario, like 0*C or 85*C, supply voltage limits...

Hi @lscalambrin
Select 8bit sampling then it will allow to capture up to 256Mi samples.
The repeated mode stops automatically, performs single capture if the transfer/processing takes too much time. You could use a Script like this to force repeated capturing.
do{Logic.single()} while(Logic.wait());

Hi @lscalambrin
The Digital Discovery oscillator spec is 50ppm, DSC1033CC1:
https://ww1.microchip.com/downloads/en/DeviceDoc/DSC1033 Datasheet MKQBPD0318091-7.pdf
 

Hi @lscalambrin
As you can see in the earlier attached posts, comparing to another device I've measured 4.7ppm and the user 10ppm.

Hi @attila,
Once again, thanks for your answer.
It seems that it will not work for me, because I wanted to measure the drift of a clock which is around 40ppm, so having 50ppm in the oscillator makes it impossible, as far as I know.
Maybe I should use a dev kit with a GPS signal or something similar to measure a drift in the order of 40ppm. What do you think ?
 
Thanks!