drcoelho
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by drcoelho
-
-
I need to calibrate IOTech Tempscan/1000. The manual says to set bit 9 on rear dip switch in order to enable calibration mode, but my unit does not have the 9th bit. I do see a CAL jumper on the motherboard, but I am unclear how to configure it. See attached photo for the jumper. This is URGENT, we are down on mission critical application. Thx.
-
I need to calibrate an IOTech Tempscan/1000 and the manual says to set the 9th bit of DIP switch to allow calibration mode, but my unit does not have the 9th bit, there is a connector on the motherboard labelled CAL but I am unclear which pins to short in order to enable calibration mode. URGENTLY need help with this, we are down hard at the moment. Thx.
RMA requested
in Measurement Computing (MCC)
Posted
I just ordered your P/N EP373. I have decided to go with another DAQ product and I need an RMA for return of this product, it will be returned un-opened. If you can initiate a private chat, I'll provide my order number.