[E-DIO24 Connection]

The first option ended up working. I am still interested in getting it to connect via setting the IP address as I am currently getting the following response when trying to ping the device at 192.168.0.101: "Destination host unreachable".

[E-DIO24 Connection]

2088704

[E-DIO24 Connection]

1 minute ago, Jeffrey said:

Have you tried a direct connect?

meaning connect it to your computer's network connector, just to see if it will work there?

I currently have it directly connected to the PC.

[E-DIO24 Connection]

3 hours ago, Jeffrey said:

Hello @burdi49,

I have found the easiest way to get the E-DIO24 to connect to your computer or network is to, First plug in the CAT5 cable between the host computer or network hub/switch, and THEN apply power.  Applying the power last insures the device is ready to auto negotiate with the host.

Now run InstaCal. click on "Install" >> Add Board.  Click on ENET tab, and Refresh button.

Click on the entry for the E-DIO24, the click on "Add" button.

And that's it.

If you have tried other methods or options, you may want to run through the reset procedure found on page 9 of the User's manual (https://www.mccdaq.com/pdfs/manuals/E-DIO24.pdf).

Regards,

Jeffrey

 

@Jeffrey I am still unable to connect to the device following the reset procedure. Within InstaCal the device is still not detectable.

[E-DIO24 Connection]

Good morning,

I am currently unable to connect to my E-DIO24 device. I have installed the software which is unable to detect the device and tried to connect via IP address but am unable to ping the device. Any information on this would be greatly appreciated.

Thanks