wd74
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by wd74
-
-
Hello, I am running LabVIEW 2022 Q3 32 bit (22.3f0) I am experiencing the same problem as Marcel above with this new software version. On the ULx install step I get a message that "LabVIEW 2010 or later is required for this package". and the install gets interrupted before the software can be installed.
I have instaCal 6.73 installed and it recognized my device.
I attempted the solution suggested by John using the files in the ULxForLV.zip in LabVIEW2021_ULx downloads folder. When I ran the software provided in this folder I got the same message and installation was unsuccessful.
Can anybody help with this problem?
Kind regards,
Will
Cannot create hardware physical channel control for ULx Create Channel.vi
in LabVIEW
Posted
Hello,
In LabVIEW 2020 SP1, I am having trouble creating a Physical Channel control for the ULx Create Channel.vi. When I right click on the input I am not able to create a control or a constant. I am therefore not able to discover the name of the channel as the instructions describe. https://kb.mccdaq.com/knowledgebasearticle50357.aspx
I was able to create the control for the first daq I worked with (USB-1608G) a few months ago (same software setup). I can still control this daq by setting a constant to the input (Dev#/AuxPort/Do#).
Now I am trying to read the digital inputs of a USB-1208FS-Plus. Unfortunately, I am no longer able to create this control (and discover hardware channel syntax). Does anyone know why the create control for this subVI would stop working?
Re-installing ULx did not change anything.
I was unsuccessful after trying the advice here https://kb.mccdaq.com/KnowledgebaseArticle50432.aspx. The devices appear in InstaCal (board0) and I close InstaCal before running Labview. I am connecting only one device at a time.
According to the documentation the Digital I/O on the USB-1208FS-Plus have a Portnum like FIRSTPORTA, FIRSTPORTB. is there some syntax like the one for the USB-1608G that I can use to hard code the physical channel input? https://www.mccdaq.com/pdfs/manuals/Mcculw_WebHelp/ULStart.htm?_ga=2.39434403.1299140923.1671122205-150325646.1659371580
Thank you