Hello,
In LabVIEW 2020 SP1, I am having trouble creating a Physical Channel control for the ULx Create Channel.vi. When I right click on the input I am not able to create a control or a constant. I am therefore not able to discover the name of the channel as the instructions describe. https://kb.mccdaq.com/knowledgebasearticle50357.aspx
I was able to create the control for the first daq I worked with (USB-1608G) a few months ago (same software setup). I can still control this daq by setting a constant to the input (Dev#/AuxPort/Do#).
Now I am trying to read the digital inputs of a USB-1208FS-Plus. Unfortunately, I am no longer able to create this control (and discover hardware channel syntax). Does anyone know why the create control for this subVI would stop working?
Re-installing ULx did not change anything.
I was unsuccessful after trying the advice here https://kb.mccdaq.com/KnowledgebaseArticle50432.aspx. The devices appear in InstaCal (board0) and I close InstaCal before running Labview. I am connecting only one device at a time.
According to the documentation the Digital I/O on the USB-1208FS-Plus have a Portnum like FIRSTPORTA, FIRSTPORTB. is there some syntax like the one for the USB-1608G that I can use to hard code the physical channel input? https://www.mccdaq.com/pdfs/manuals/Mcculw_WebHelp/ULStart.htm?_ga=2.39434403.1299140923.1671122205-150325646.1659371580
Thank you