Hello all,
I tried to ask this question on the Xilinx site but I was redirected to ask the Digilent community for a help.
I read already through a few forums to make the Xilinx ISE iMPACT with the CMODS6 working on my PC.
My issue is that I cant program FLASH memory located on the CMODS6, but FPGA by itself I can program.
So far, I have installed full ISE 14.5. on Windows 7 and also all drivers and tools I could find for
the CMODS6 (except the default installed with ISE)
Adept Digilent tool - I am also able to program a .bit file into CMODS6 (FPGA)
I tried to copy and replace ISE's .dlls with .dlls explicitly available for CMODS6
I tried to reinstall ISE as well as only tried standalone Lab Tools (iMPACT)
and many other tips from forums ...
All in one, once I try to program the CMODS6 FLASH (iMPACT), with steps working on our school's PC:
Create PROM File - Auto select PROM - generate MCS
Add device by choosing generated .bit file
Generate File
Boundary Scan - adding .bit file
Add SPI/BPI flash .mcs file by right click above my device (dashed rectangle)
Select correct SPI PROM - S25FL128S
Run "Program" (on the FLASH icon - programming FLASH)
the process gets stuck when "Programming FLASH" ... with progress 0%
I repeat, that exactly the physically same CMODS6 fully works on other W7-PC
with ISE 14.5. and programming of the CMODS6 flash takes on this machine 3-4 minutes.
Anybody knows, how to fix this ?
Thanks and good luck with your challenges,
Vladimir