JerryFen
-
Posts
5 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Posts posted by JerryFen
-
-
2022-02-03the
Thank you.
I have made some progress and will continue. I have successfully installed the Oracle Virtual Box and Downloaded and successfully
installed the 14_7 ISE . I needed first to get a windows 10 pro upgrade (and then windows 11 Pro) as the software requires to pro model of windows. At that point I learned that a VM (virtual machine) was required and as stated above was successful.
Unfortunately at that point, my machine had to go in for a warranty repair. On another machine I have been trying to find the time
to bring it up to a working point. I thank you for your help and guidance and the links provided
-
2021-12-21
I am stuck trying to get an environment that I can use for basys2 and verilog. I have successfully done this for basys3. For basys2 I have vivado 2017.2 (stated in an appendix of a book) but cannot
configure it to use basys2 ) . Could someone give me
some help to get started with basys2. ( I can use
vivado 2019.1 successfully for basys3 after copying board files
but am completely stopped with basys2. My problem
is not with verilog but getting over a very elementary
problem of getting and configuring the proper files
needed for basys2. Are there any board files required
for basys2 (I think there must be but I cannot find them nor can I find instructions for where they go )
The tutorial for basys3 was sufficient to get me started but not the tutorial for basys2.
-
2021-12-20
I originally asked this question in the "say hello" section but it belongs here.
I cannot find the board files for the basys-2 board and believe that I need to put them in the vivado version
install directory to allow me to choose the correct family (spartan 3 e , I believe) and part and package.
they were not in the old section of master.zip. Once I can create the bit file I have the Adept software
to configure the basys-2 board. I have already had success with the basys-3 board.
Please let me know where I can find the board files.
thank you
-
2021-12-20
I am trying to create a bit file on the basys-2 board but do not get the opportunity to select the
correct family (Spartan-3E) etc. in Vivado-2017.2 and believe it is because I do not have a board file
(which I did get from the master.zip) for another board (basys-3) that I have. Once I can get
the proper bit file synthesized I believe I can codnfigure the basys-2 board using the Adept software
which I have downloaded. and so my question is Where can I get the board file to load to the vivado install directory for the basys-2 board?
thank you
What tools required for basys2 board from Xilinx ?
in FPGA
Posted
2022-02-03
I forgot to add that on a basys3 I have been successful at following and implementing examples of working with an fpga.
It is more to achieve a desire to get the basys2 up and working than a requirement and I will continue with that challenge.