Jump to content

JerryFen

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by JerryFen

  1. 2022-02-03 I forgot to add that on a basys3 I have been successful at following and implementing examples of working with an fpga. It is more to achieve a desire to get the basys2 up and working than a requirement and I will continue with that challenge.
  2. 2022-02-03the Thank you. I have made some progress and will continue. I have successfully installed the Oracle Virtual Box and Downloaded and successfully installed the 14_7 ISE . I needed first to get a windows 10 pro upgrade (and then windows 11 Pro) as the software requires to pro model of windows. At that point I learned that a VM (virtual machine) was required and as stated above was successful. Unfortunately at that point, my machine had to go in for a warranty repair. On another machine I have been trying to find the time to bring it up to a working point. I thank you for your help and guidance and the links provided
  3. 2021-12-21 I am stuck trying to get an environment that I can use for basys2 and verilog. I have successfully done this for basys3. For basys2 I have vivado 2017.2 (stated in an appendix of a book) but cannot configure it to use basys2 ) . Could someone give me some help to get started with basys2. ( I can use vivado 2019.1 successfully for basys3 after copying board files but am completely stopped with basys2. My problem is not with verilog but getting over a very elementary problem of getting and configuring the proper files needed for basys2. Are there any board files required for basys2 (I think there must be but I cannot find them nor can I find instructions for where they go ) The tutorial for basys3 was sufficient to get me started but not the tutorial for basys2.
  4. 2021-12-20 I originally asked this question in the "say hello" section but it belongs here. I cannot find the board files for the basys-2 board and believe that I need to put them in the vivado version install directory to allow me to choose the correct family (spartan 3 e , I believe) and part and package. they were not in the old section of master.zip. Once I can create the bit file I have the Adept software to configure the basys-2 board. I have already had success with the basys-3 board. Please let me know where I can find the board files. thank you
  5. 2021-12-20 I am trying to create a bit file on the basys-2 board but do not get the opportunity to select the correct family (Spartan-3E) etc. in Vivado-2017.2 and believe it is because I do not have a board file (which I did get from the master.zip) for another board (basys-3) that I have. Once I can get the proper bit file synthesized I believe I can codnfigure the basys-2 board using the Adept software which I have downloaded. and so my question is Where can I get the board file to load to the vivado install directory for the basys-2 board? thank you
×
×
  • Create New...