Jump to content

Bianca

Forum Managers
 View Profile  See their activity

  • Posts

    538

  • Joined

  • Last visited

 Content Type 

Posts posted by Bianca

    Cannot talk to Arty board with Vivado 17.2

    in FPGA

    Posted

    @kpax,

    It seems you have an issue with the drivers on this one. Sometimes when you install Vivado the drivers don't install correctly. So, if you have vivado Installed, please try to install manually the drivers. Here is the path to file the cable drives, It's the same on each installer: C:\Xilinx\Vivado\2015.4\data\xicom\cable_drivers\nt64\digilent I have a previous version of Vivado, you'll have 2017.2

    Please try this and if it's not working we'll see if there's anything else we can do

    Best regards,

    Bianca

    Digilent-SMT1 recovery

    in FPGA

    Posted

    Hello,

    You can reprogram the memory of your device.

    In the link below you will find the application to reprogram the memory of your device. Please follow the given instructions:

    https://drive.google.com/file/d/0B-YtGABZihr-NjU4Rjg4dzhhaTA/view

    - make sure to have only the SMT1 connected to the computer. No other FTDI-USB device, like: USB-UART converter and close other applications, like: WaveForms, Xilinx iMPACT, Matlab....
    -start FTDIConfig
    -press "Find Devices"
    -Pres "Get Info"
    -select present: "JTAG-SMT1'
    -press "Program"
    -press Cycle
    -close FTDICOnfig
    -start Adept and see if the cable is recognized. 

    Best regards,
    Bianca 

×
×
  • Create New...