[What is the size of the DC plug on the AC adapter that comes with the Analog Discovery Pro 3000 Series?]

Hi @attila-san

If possible, could you please share the specifications for the AC adapter?
If you share it with us, we will be able to select the appropriate AC adapter.
 

Thanks.

[What is the size of the DC plug on the AC adapter that comes with the Analog Discovery Pro 3000 Series?]

Hi @attila

Thanks for the reply.
After asking the question, I found the following URL.
https://digilent.com/reference/test-and-measurement/analog-discovery-pro-3x50/specifications
Would it be correct to refer to the information in the "Power Requirements" section of this page?

Note:
Under the Japanese PSE regulations, it is against the law to display only the PSE mark.
The PSE mark and the name of the company that imported the AC adapter to Japan must be displayed on the AC adapter.
Therefore, I wanted to know the specifications of the AC adapter.

[What is the size of the DC plug on the AC adapter that comes with the Analog Discovery Pro 3000 Series?]

To use ADP in Japan, it is necessary to use an AC adapter that complies with Japanese PSE regulations.
In order to purchase an AC adapter that complies with the law, we would like to obtain the data sheet of the original AC adapter.
Or, I want to know the size of the DC plug.
 

[About the tray used for packaging JTAG-SMT2-NC]

Hello @JColvin

I confirm that the JTAG-SMTxxx product has been revised.
Thank you for revising the document.
 

[About the tray used for packaging JTAG-SMT2-NC]

Hello @JColvin

I have not received a reply since April 25.
The reference manual has not been revised.
Are there any plans to revise it?
Also, are the baking conditions for JTAG-SMT3-NC the same?

[Which is the revision of the schematic when I buy Arty A7 now?]

Two schematics for revisions E.0 and E.2 are available at the following URL
https://digilent.com/reference/programmable-logic/arty-a7/start?redirect=1

Which schematic should I refer to when I purchase an Arty A7 now?
Is the revision clearly marked on the evaluation board? (Rev E.0 or Rev E.2 ?)

[About the tray used for packaging JTAG-SMT2-NC]

Hi @JColvin

Thank you for your response.

I understand that a revision of the reference manual for JTAG-SMT2-NC is necessary.

Could you please tell me when the document is scheduled to be revised?

 

Reason for wanting to know the revision schedule:

I am a sales agent for Digilent products and I need to provide customers who purchased JTAG-SMT2-NC with supporting documents.

[About the tray used for packaging JTAG-SMT2-NC]

Hi @JColvin 

Thank you for your prompt response.

My previous statement was inappropriate.
I have a question regarding the maximum temperature limit for the tray used in the product packaging.

I would like to have a response by the evening of April 24th.
Looking forward to hearing good news from you.

Thanks

Matsuya

[About the tray used for packaging JTAG-SMT2-NC]

Please let me know the upper limit of the temperature for the tray used when shipped from Digilent.
We will bake the JTAG-SMT2-NC before mounting it on the board.
I would like to know if it is possible to bake while leaving it on the tray.