[Digital Discovery - DptiIO failed ERC: 0x2]

We used 3.13.19, I will try the 3.13.20 or latest...

 

[Digital Discovery - DptiIO failed ERC: 0x2]

Thank You! @attila

We did tried the updated and reserved (downgrade) it because of this devices were not appearing on the device manager.

Do we need to reboot the PC after installed so the devices appear on the device manager?

Should we perform a device fix? I tried it and device was not showing after device fix...

Is there a way to open the Device fix, even with the devices detected?

Any recommendations ...

 

 

[Digital Discovery - DptiIO failed ERC: 0x2]

@malexander We executed the command you provided. We only have one item listed.

We are currently running RHEL 7.5

Here are some of the PC specs.

I hope we can find a solution. Regards, @MarceloNotThePLCguy

[Digital Discovery - DptiIO failed ERC: 0x2]

We updated the Waveforms Software and the Adept 2 to latest versions and we continue to see the issue.

We noticed the following from the Waveforms Application:

• The acquisition state changed to Error.
• Status change to OC.
• DptilO failed: ERC: 0x2
• During running mode: Current is ~250 mA.

We have multiple USB devices (Analog Discovery 2, Digital Discovery Board and others) connected to this computer running RHEL.

We have pattern and a logic settings running in the DD.