I've got a problem with using my AD1 board, WaveForms is not detecting it anymore and it seems to be a usual problem with micro usb connector. I've checked continuity between connector pins on the pcb and the usb cable end and there is no connection between black/red wires and sides pins, only green/white seems to be connected to middle pins. Hence next I will try to replace micro usb connector but I couldn't find the same as used on the board. Can anyone have BOM/ part number for the connector?Or can I use any connector like molex (part number 47590-0001)?
Question
kaktusak
I've got a problem with using my AD1 board, WaveForms is not detecting it anymore and it seems to be a usual problem with micro usb connector. I've checked continuity between connector pins on the pcb and the usb cable end and there is no connection between black/red wires and sides pins, only green/white seems to be connected to middle pins. Hence next I will try to replace micro usb connector but I couldn't find the same as used on the board. Can anyone have BOM/ part number for the connector?Or can I use any connector like molex (part number 47590-0001)?
thanks
Robert
Link to comment
Share on other sites
4 answers to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.