Support for data logging

[cardif]

I need an oscilloscope that can measure a 3GHz RF signal (the signal fits within a 10 us window) and can capture the waveform envelope every 200 Hz (with a trigger) so every 5 ms. The key parts would be to be able to implement the oscilloscope in LABVIEW (or in C# optionally) and be able to log the envelope for every single pulse (200Hz trigger) without losing data. I would like the capture time for at least 1-2 consecutive minutes. Now I took a look at your products and I am interested in the Eclypse Z7: Zynq-7000 SoC Development Board for Modular Instrumentation (4-channel Oscilloscope Bundle with two Zmod Scope 1410-105s). I would like to understand if it is possible to do what was previously described or if you had suggestions on another product that can do it. Below is an example of the signal I want to capture every 200Hz. Thank you for you help!