Netfpga SUME

[Leo_W]

Hello! I have a SUME development board and the Si5324 on it is not outputting. If it needs repairing, will the default frequency of 156.25 MHz be restored after replacement?

What are some testing approaches? I utilized the ibert test, but I'm not quite familiar with it. It might be that I have a problem with clock configuration.The FPGA_SYSCLK on the board appears to be functioning properly after my tests.

[artvvb]

Hi @Leo_W

The NetFPGA SUME was end-of-lifed a couple of years ago (February 2022), and Digilent isn't prepared to provide substantial support for it at this time. My apologies.

Thanks,

Arthur

[Leo_W]

On 8/31/2024 at 12:25 AM, artvvb said:

Hi @Leo_W

The NetFPGA SUME was end-of-lifed a couple of years ago (February 2022), and Digilent isn't prepared to provide substantial support for it at this time. My apologies.

Thanks,

Arthur

ok，thanks