Dick Roche Posted August 20 Share Posted August 20 I HAVE DOWNLOADED THE ABOVE FILE BUT AM NOT SURE HOW TO GET IT INTO MY DASYlab 2022. I don't want to make a mistake. Link to comment Share on other sites More sharing options...
0 Fausto Posted August 21 Share Posted August 21 Hello @Dick Roche. Please reply with a screen capture of the version and build from DASYLab's menu Help - About. What is the link used for the download? Old driver package versions should not be mixed with newer releases of DASYLab. Which Windows OS version are you using? Which MCC device are you using? The Measurement Computing package option is available with DASYLab and can be enabled provided InstaCal was already installed. Lastly, reference the DASYLab tutorials and training on the DASYLab Reference page. Regards, Fausto Link to comment Share on other sites More sharing options...
0 Dick Roche Posted August 22 Author Share Posted August 22 Windows 11 , MCCUSB-1208FS-Plus. I did what I needed w/Dasylab 13 but have been to do much with 2022 Full Link to comment Share on other sites More sharing options...
0 Fausto Posted August 22 Share Posted August 22 Hello @Dick Roche. Thank you for the answers. 13 hours ago, Dick Roche said: I did what I needed w/Dasylab 13 but have been to do much with 2022 Full There was a step to add/update the Measurement Computing driver file for DASYLab in earlier versions, but not for DASYLab 2022. Please reply with a screen capture of the packages enabled in the DASYLab Configurator, as I showed previously. If the Measurement Computing package is enabled, then the DASYLab.ini file should show 'MCCDRV_I.dll' in the EXTEND section. Reply with a screen capture if it does not. The DASYLab.ini file is located in the 'C:\Users\Public\Documents\DASYLab\16.1.0\eng' directory. Next, please reply with a screen capture of your expanded Modules - Inputs/Outputs in DASYLab as I show below. Regards, Fausto Link to comment Share on other sites More sharing options...
0 Dick Roche Posted August 22 Author Share Posted August 22 AT ONE POINT THE MCC-DRV inputs and outputs were displayed in the tree but somehow I lost them and InstaCal dosen't get them back. Question: A few years ago I needed assistance with installing a CAD program- to save time, the tech took control of my computer for the installation. Is it possible to use that method. Then as now, I have made a lot of mistakes. I would gladly pay a fee for this service- could you do this? Link to comment Share on other sites More sharing options...
0 Dick Roche Posted August 22 Author Share Posted August 22 08202024 NNR.DSB is the w08202024 NNR.DSBorksheet I had running. Link to comment Share on other sites More sharing options...
0 Fausto Posted August 22 Share Posted August 22 Support is available via this forum. InstaCal must be installed before enabling the Measurement Computing package in the Configurator. Are you using DASYLab 2022 or still using DASYLab v13? Are you now seeing the MCC-DRV inputs and outputs in DASYLab? If using DASYLab 2022, what is the build version as shown in the top menu Help - About. Please provide a screen capture. Lastly, you attached a DASYLab worksheet. Please provide context for this worksheet. Link to comment Share on other sites More sharing options...
0 Dick Roche Posted August 23 Author Share Posted August 23 Link to comment Share on other sites More sharing options...
0 Dick Roche Posted August 23 Author Share Posted August 23 ThANK YOU FOR YOUR HELP. i AM TRYING TO USE THE 2022 AND NEVER HAD Dasylab on it is installed Instacal is loaded and does recognize the USB-1208FS-Plus. Recently I haven't been able to load MMC-DRV. I did have it once. Thank you Dick Link to comment Share on other sites More sharing options...
0 Fausto Posted August 23 Share Posted August 23 As mentioned earlier, the Measurement Computing package option should be enabled in DASYLab's Configurator provided InstaCal was already installed. Close InstaCal before launching the Configurator or DASYLab application. Once verified that the Measurement Computing package is enabled in the Configurator, close the Configurator and launch DASYLab. Select the Modules tab in the upper left section of the application and then expand the Modules - Inputs/Outputs branch. Do you see a MCC-DRV branch? If the branch is there, then drag-n-drop the 'Analog Input' module onto the worksheet, select your USB-1208FS-Plus device, and configure the channel(s). Close the module and drag over a display module. Connect the two modules and run the worksheet. Are you seeing the acquired data in the display module? Reply with screen captures if you see something different. Reference the DASYLab tutorials and training on the DASYLab Reference page. Regards, Fausto Link to comment Share on other sites More sharing options...
0 Fausto Posted August 28 Share Posted August 28 Please reply with screen captures of the Packages tab in the Configurator, showing the expanded Data Acquisition packages, and the expanded Modules - Inputs/Outputs branch in DASYLab. Link to comment Share on other sites More sharing options...
0 Dick Roche Posted August 28 Author Share Posted August 28 Fausto, Would an option be my sending you (pre-pay FEDX) and I pay a fee for the troubleshooting. Time is important to both of us and I feel I am wasting a lot of yours. Link to comment Share on other sites More sharing options...
0 Fausto Posted August 28 Share Posted August 28 Taking this offline. Link to comment Share on other sites More sharing options...
Question
Dick Roche
I HAVE DOWNLOADED THE ABOVE FILE BUT AM NOT SURE HOW TO GET IT INTO MY DASYlab 2022. I don't want to make a mistake.
Link to comment
Share on other sites
12 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now