Hello everyone. I would like to ask for advice on my project, namely: To develop an interface in LabVIEW for controlling an electric drive via NI OPC server. The problem is the following:
I can't set up the correct display of data on the graph for the characteristics of the motor Current, moment.
I was able to implement the transmission of auxiliary signals. (Reading the words of the state, current readings of current, torque, speed) through the LAD language in Tia Portal V15.
I announced these addresses in NI OPC server and implemented them in LabVIEW, but I don't know how to make a competent display
Question
ARN1_1
Hello everyone. I would like to ask for advice on my project, namely: To develop an interface in LabVIEW for controlling an electric drive via NI OPC server. The problem is the following:
I can't set up the correct display of data on the graph for the characteristics of the motor Current, moment.
I was able to implement the transmission of auxiliary signals. (Reading the words of the state, current readings of current, torque, speed) through the LAD language in Tia Portal V15.
I announced these addresses in NI OPC server and implemented them in LabVIEW, but I don't know how to make a competent display
(look at the picture)
Maybe I'm translating addresses wrong somewhere?
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now