Cannot export hardware

[notooth]

I followed this tutorial to create a project. When I opened File Menu, selected Export Hardware item under Export, I got this error:    

Cannot write hardware definition file as there are no generated IPI blocks

Can anyone help?

[artvvb]

Have you created a block design and generated a bitstream for your project? This error looks like what would happen if you tried exporting a hardware design from an empty project.

Thanks,

Arthur

[notooth]

According to the tutorial, I generated a bitstream, but I have not created a block design.
For your suggestion, I have just created a block design by clicking Flow Navigator > IP Integrator > Create Block Design, but the issue is still there.

[artvvb]

Exporting a hardware platform assumes that you have created a block design that includes a processor, and an address map that informs how the processor will communicate with various peripherals in your design. The step is not needed if you aren't going to bring your design up into Vitis to write software. If you have a bitstream without a processor that you want to run on your board, you may want to refer to a guide like this instead: Getting Started with Vivado for Hardware-Only Designs.