VISA error

[martagi]

Dear Team, 

I was using a LabVIEW program last year that was working. I do use the DT9804 data acquisition box from Data Translation. Since I was getting several errors, I decided to reinstall everything by following the instructions, but now I don't get it to run again, I always get errors and I have repeated the process several times. 

Could you please help me? 

Hereby I attach a screenshot of the issue. 

Bests, 
Marta

[JRys]

Hello,

You may want to go ahead and uninstall what you've installed. Then, download and install the required software from the Omni-CD https://www.mccdaq.com/downloads/DTSoftware/Omni-CD/

Next, you can go ahead and install the LVLink software for LabVIEW. 

https://www.mccdaq.com/downloads/DTSoftware/LVLink/

We can test to make sure it's working by running an example. Load the programming example named DTAinContinuous.vi, and look for it in \National Instruments\LabVIEW 20xx\user.lib\LV-Link3\Examples

Press the LabVIEW Run button, then from the Device list, select your DT9804. Next, press the example Start button and verify you see some data. If it works for you, you should be all set to go ahead and run your program.

Best regards,
John