1) Newbie to FPGA but fairly savvy with linux, embedded (arduino) etc.
2) Linux UBUNTU 14.04.03
3) Vivado 2016.2 webPack / SDK
Problem - Can't program the FPGA from either SDK or Vivado. hw-server can't see the target, although I can see it in dmesg coming up on ttyUSB0 and 1
[ 1548.800018] usb 1-3: new high-speed USB device number 5 using ehci-pci
[ 1548.937650] usb 1-3: New USB device found, idVendor=0403, idProduct=6010
[ 1548.937655] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1548.937657] usb 1-3: Product: Digilent Adept USB Device
[ 1548.937660] usb 1-3: Manufacturer: Digilent
[ 1548.937662] usb 1-3: SerialNumber: 210279759128
[ 1548.940548] ftdi_sio 1-3:1.0: FTDI USB Serial Device converter detected
[ 1548.940584] usb 1-3: Detected FT2232H
[ 1548.940820] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1548.943414] ftdi_sio 1-3:1.1: FTDI USB Serial Device converter detected
[ 1548.943445] usb 1-3: Detected FT2232H
[ 1548.943688] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB1
4. Permissions updated on ttyUSB ports
as I am not running vivado as root.
*** Vivado does not appear to be detecting the target.
update_compile_order -fileset sources_1
open_hw
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
refresh_hw_server {localhost:3121}
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_server
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refresh
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to reupdate_compile_order -fileset sources_1
open_hw
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
refresh_hw_server {localhost:3121}
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_server
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refresh
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
open_hw
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refreshfresh
open_hw
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refresh
Question
edwar64896
Hi. Salient facts follow...
1) Newbie to FPGA but fairly savvy with linux, embedded (arduino) etc.
2) Linux UBUNTU 14.04.03
3) Vivado 2016.2 webPack / SDK
Problem - Can't program the FPGA from either SDK or Vivado. hw-server can't see the target, although I can see it in dmesg coming up on ttyUSB0 and 1
[ 1548.800018] usb 1-3: new high-speed USB device number 5 using ehci-pci
[ 1548.937650] usb 1-3: New USB device found, idVendor=0403, idProduct=6010
[ 1548.937655] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1548.937657] usb 1-3: Product: Digilent Adept USB Device
[ 1548.937660] usb 1-3: Manufacturer: Digilent
[ 1548.937662] usb 1-3: SerialNumber: 210279759128
[ 1548.940548] ftdi_sio 1-3:1.0: FTDI USB Serial Device converter detected
[ 1548.940584] usb 1-3: Detected FT2232H
[ 1548.940820] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1548.943414] ftdi_sio 1-3:1.1: FTDI USB Serial Device converter detected
[ 1548.943445] usb 1-3: Detected FT2232H
[ 1548.943688] usb 1-3: FTDI USB Serial Device converter now attached to ttyUSB1
4. Permissions updated on ttyUSB ports
as I am not running vivado as root.
medwards@UBUNTU14:/dev$ ls -al ttyU*
crw-rw-rw- 1 root dialout 188, 0 Jul 31 02:42 ttyUSB0
crw-rw-rw- 1 root dialout 188, 1 Jul 31 02:42 ttyUSB1
Have tried running cse server as well.
*** Vivado does not appear to be detecting the target.
update_compile_order -fileset sources_1
open_hw
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
refresh_hw_server {localhost:3121}
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_server
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refresh
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to reupdate_compile_order -fileset sources_1
open_hw
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
refresh_hw_server {localhost:3121}
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_server
WARNING: [Labtoolstcl 44-27] No hardware targets exist on the server [localhost:3121]
Check to make sure the cable targets connected to this machine are properly connected
and powered up, then use the refresh_hw_server command to re-register the hardware targets.
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refresh
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
disconnect_hw_server localhost:3121
connect_hw_server
INFO: [Labtools 27-2285] Connecting to hw_server url TCP:localhost:3121
open_hw_target
ERROR: [Labtoolstcl 44-469] There is no current hw_target.
disconnect_hw_server localhost:3121
disconnect_hw_server localhost:3121
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
open_hw
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refreshfresh
open_hw
refresh_hw_server
ERROR: [Labtoolstcl 44-37] No server specified to refresh
refresh_hw_target
ERROR: [Labtoolstcl 44-20] No current target to refresh
I have a successful bitstream to program...
any ideas on the way forward here?
Thanks,
Mark.
Link to comment
Share on other sites
1 answer to this question
Recommended Posts
Archived
This topic is now archived and is closed to further replies.