Russ2010 Posted March 2, 2023 Share Posted March 2, 2023 I installed the MCCdaq with LabVIEW 32 and 64bit when I run the program I do not se any ulxx or even any new icon added to my profile. I am running LabVIEW 2021. Link to comment Share on other sites More sharing options...
0 JRys Posted March 2, 2023 Share Posted March 2, 2023 Hello, To add our support to LabVIEW 2021, download the latest version of the MCC DAQ Software CD. The download will extract an image of the CD that we use to hand out. On the main screen, select InstaCal and ULx for LabVIEW. Two installers will run. The LabVIEW installer should find both copies of LabVIEW. However, I recommend installing only one. After, you can tell that our support was added because \National Instruments\Shared\ will have a sub folder named ULx. We put our LabVIEW examples in \National Instruments\LabVIEW 2021\Examples\ULx\. The MCC tool pallet should be on the User Libraries pallet. If missing, copy the attached file to \National Instruments\LabVIEW 2021\user.lib\ and restart LabVIEW. Best regards, John ULx.mnu Link to comment Share on other sites More sharing options...
0 Russ2010 Posted March 3, 2023 Author Share Posted March 3, 2023 Thanks Looking through the examples i can not find an example for the TC-32 that is using the network connection. by chance you have one? Link to comment Share on other sites More sharing options...
0 JRys Posted March 3, 2023 Share Posted March 3, 2023 Hello, The network connection is established with InstaCal as well as the thermocouple types. To add the TC-32, click the Add Board icon, then click the ENET tab. Next, select TC-32 and add it to the main board list. Next, double-click the board in the main board list to bring up the configuration dialog to choose TC types. LabVIEW reads the InstaCal setup when you open it, so make sure LabVIEW is closed while you configure the TC-32 and make sure InstaCal is closed when opening LabVIEW. After, it's a simple task to read the device. I've attached an example for you. Best regards, John myTC32Example.vi Link to comment Share on other sites More sharing options...
0 Russ2010 Posted March 3, 2023 Author Share Posted March 3, 2023 Nice example but how do you tell the device what type of thermocouple it is? Link to comment Share on other sites More sharing options...
0 JRys Posted March 3, 2023 Share Posted March 3, 2023 Configure the thermocouple type in InstaCal. Link to comment Share on other sites More sharing options...
0 Russ2010 Posted March 7, 2023 Author Share Posted March 7, 2023 When I create an executable with the TC-32 would i need to install instaCal on the test PC too? Link to comment Share on other sites More sharing options...
0 Fausto Posted March 9, 2023 Share Posted March 9, 2023 Please reference the ULx for NI LabVIEW Help for the various scenarios to distribute a ULx for NI LabVIEW application. Link to comment Share on other sites More sharing options...
0 JRys Posted March 13, 2023 Share Posted March 13, 2023 Review the following for more information about making LabVIEW MCC ULx executables and installers. https://kb.mccdaq.com/KnowledgebaseArticle50609.aspx John Link to comment Share on other sites More sharing options...
0 Russ2010 Posted March 17, 2023 Author Share Posted March 17, 2023 I will be trying the labview runtime and instacal on the test PC next week when I get back to that project. Link to comment Share on other sites More sharing options...
Question
Russ2010
I installed the MCCdaq with LabVIEW 32 and 64bit when I run the program I do not se any ulxx or even any new icon added to my profile.
I am running LabVIEW 2021.
Link to comment
Share on other sites
9 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now