MCC172 examples C data_logger

[AndyCH]

我可以執行示例 C“記錄器”。

但我看不到 Y 軸單位。

我通過信號發生器輸出“10Hz”“正弦波”。

請告訴我我可能做錯了什麼。

Edited November 10, 2022 by AndyCH

[AndyCH]

I changed the board from 64bit to 32bit to solve this problem.

[DAQman]

Hello,

I could not duplicate the x-axis scale issue that you reported so it could be regional caused by the local language being mishandled.

Best regard,

John

[AndyCH]

HI JRys

when I check the local language. Everything is ok
So I print "logger.c line179 freq_val value" on the console.

I can see the value is right.

But the X-axis still display "0".

Maybe there is a problem with the displayed part.

Can you help me to confirm this part?

Thank you

 

Edited November 11, 2022 by AndyCH

[DAQman]

Hi Andy,

I was able to duplicate your issue using 64-bit Raspbian. 

MCC did not fully test the DAQHAT support & examples using 64-bit Raspbian and for this reason we continue to recommend that the 32-bit OS be used. I will report your findings to engineering and hopefully a future release will address the issue.

Thank you for letting me know.

Best regards,
John

[DAQman]

Hi Andy,

Engineering was able to fix the issue rather quickly thanks to your help. Apparently, it was an incorrectly formatted string in the logger.c file that caused the x-axis scale to be wrong. The fix was tested on both the 32 and 64-bit Raspbian.

https://github.com/mccdaq/daqhats

best regards,
John