Direct SPI programming mode the device M25P16

[Hernane]

Estou utilizando ISE Impact 11.1 ,Xilinx programer DLC10  no Windonws 7-64bit para programar a FPGA da xilinix via modo SPI utilizando uma PROM  M25P16.

Quando vou executar a gravação do arquivo .mcs na PROM ocorre a seguinte falha:

// *** BATCH CMD : Erase -p 1 

Validating device...

'1': IDCODE is 'ffffff' (in hex).

'1': ID Check failed.

INFO:iMPACT:2595 - Device validation terminated.

PROGRESS_END - End Operation.

Elapsed time =   0 sec.

PROGRESS_START - Starting Operation.

// *** BATCH CMD : Verify -p 1 

Validating device...

'1': IDCODE is 'ffffff' (in hex).

'1': ID Check failed.

INFO:iMPACT:2595 - Device validation terminated.

PROGRESS_END - End Operation.

Elapsed time =   0 sec.

Como resolver este problema ?

-----
Translation provided via Google Translate:

I'm using ISE Impact 11.1 ,Xilinx programer DLC10 on Windows 7-64bit to program the xilinix FPGA via SPI mode using a PROM M25P16.

When I run the recording of the .mcs file in the PROM, the following error occurs:

<see error above>

How to solve this problem ?
 

Edited September 8, 2022 by JColvin
added English translation courtesy of internet

[Hernane]

Bom dia ,

Alguém pode me ajudar ?

 

[Fausto]

Hello @Hernane.

Are you attempting to program the Micron M25P16 device?

https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/m25p/m25p16.pdf

Have you been successful with communicating and programming the M25P16 device or is this the first attempt to program it?

If using a Digilent JTAG cable, please reference the Digilent Plugin for Xilinx Tools.

https://digilent.com/reference/software/digilent-plugin-xilinx-tools/start

Here's a link to the JTAG HS3 reference manual.

https://digilent.com/reference/programmers/jtag-hs3/reference-manual

Have you reached out to Xilinx support?

https://support.xilinx.com/s/question/0D52E00006iHouHSAS/impact-download?language=en_US

https://www.xilinx.com/support/download/index.html/content/xilinx/en/downloadNav/vivado-design-tools/archive-ise.html

 

Regards,

Fausto

 

[Hernane]

Boa tarde,

Fausto obrigado pela presteza.

Vamos lá: 

Você está tentando programar o dispositivo Micro M25P16?

Estou tentando gravar o arquivo . mcs

Entretatnto na tentativa de melhorar o arquivo.

Você conseguiu se comunicar e programar o dispositivo M25P16 ou esta é a primeira tentativa de programá-lo?

Não consigo gravar , verificar ou apagar ou checar em branco

Se estiver usando um cabo Digilent JTAG, consulte o Plugin Digilent para Ferramentas Xilinx.

Estou usando o programador plataforma XILINX cabo USB II modelo DLC10

Você entrou em contato com o suporte da Xilinx?

sim.Mas não obtive resposta

------
Translation from Google Translate:
Good afternoon,
Faust thank you for your promptness.
Come on:

Are you trying to program the Micro M25P16 device?
I'm trying to write the file. mcs
However in an attempt to improve the file.

Were you able to communicate and program the M25P16 device or is this the first attempt to program it?
Can't record, verify or erase or blank check

If using a Digilent JTAG cable, see Digilent Plugin for Xilinx Tools.
I am using XILINX platform programmer USB II cable model DLC10

Have you contacted Xilinx support?
yes, but I didn't get an answer.
 

[Hernane]

Estou utilizando o ISE impact 11.1

   Direct SPI programming

-----
Translation from Google Translate
"I'm using ISE impact 11.1
Direct SPI programming"

Edited September 8, 2022 by JColvin
posted internet provided translation