How should I query the Power supply voltage and current for the analog Discovery Pro?
Using the AnalogIO_AnalogDiscovery2_Power.py example and an voltage setting of 3.3V, I get the following response for functions FDwfAnalogIOChannelNodeStatus
USB: 58.537V 0.991A
AUX: 66.935V 1.027A
This was unexpected since I measured 3.3V at the VIO output on the header.
Using the analogIOChanhannelNodeSet and Configure functions I stepped the voltages down to 1.0V in .5V increments succesfully, however the FDwfAnalogIOChannelNodeStatus responses remained constant (same as above).
Question
Icarus
How should I query the Power supply voltage and current for the analog Discovery Pro?
Using the AnalogIO_AnalogDiscovery2_Power.py example and an voltage setting of 3.3V, I get the following response for functions FDwfAnalogIOChannelNodeStatus
USB: 58.537V 0.991A
AUX: 66.935V 1.027A
This was unexpected since I measured 3.3V at the VIO output on the header.
Using the analogIOChanhannelNodeSet and Configure functions I stepped the voltages down to 1.0V in .5V increments succesfully, however the FDwfAnalogIOChannelNodeStatus responses remained constant (same as above).
Link to comment
Share on other sites
2 answers to this question
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now